User`s guide

Modem Support (RangeLAN2 752x Only)

The RangeLAN2 752x Access Point may be remotely configured via a dial-up modem.

To allow for this type of configuration:

1. Configure the modem from a terminal or terminal emulation program at 9600

bps.

2. Issue the following commands to the modem:

ATS0=1 (Auto-answer after 1 ring)

AT&D0 (Ignore DTR)

ATE0 (No local echo)

ATQ1 (Suppress result codes)

AT&W0 (Store configuration in non-volatile memory)

3. Attach a modem via a straight-through cable to the RangeLAN2 752x Access

Point.

4. From a remote modem, dial the phone number of the modem connected to the

RangeLAN2 752x Access Point.

5. After the RangeLAN2 752x Access Point's modem has answered the phone,

press <Enter> on the terminal connected to the remote modem until you see the

configuration menu tree .

Main Menu

After using one of the above three methods, you will see the following software menu

whose choices will be described in the next chapters: