User`s guide

LED Indicators

There are three LEDs on the front of the Extension Point:

❑ The cornermost LED, called the System LED, changes from yellow to green to

indicate the Extension Point is functional. It changes from yellow to red if there is a

hardware problem with the unit. If this LED does turn red, contact Proxim Technical

Support. The LED will blink yellow if the Extension Point has entered the Error Do-

main because it cannot find a Master on the Backbone with which to synchronize.

❑ The center orange LED, called the BSA LED, flashes when the Extension Point is

forwarding packets to its Basic Service Area (BSA).

❑ The third green LED, called the Backbone LED, flashes when the Extension Point is

transmitting through the Backbone (BB) radio.

Figure 15

Front Panel LEDs

BSA LED

Backbone LED

System LED