User`s guide

Installation Checklist

In case of installation difficulties, verify the following:

❑ All 7510/752x/753x Access Points must have V1.3 or later software. Note that the

software version is listed in the upper right corner of the menu.

❑ All Masters that are using the same Domain and Security ID should have unique

Channels wherever possible. If there are more than 15 Masters, reuse Channels on

Masters that are not geographically adjacent. Use the Discover APs/EPs com-

mand from the Diagnostics menu to view all the Masters.

❑ Verify there is a link to the wired Ethernet backbone using the Display Wireless

Network Tree command from the Diagnostics menu.

❑ Use the Antenna Pointing Tool or the Run Directed Site Survey option from

the Backbone Radio Diagnostics Menu to ensure optimum antenna placement,

especially of directional antennas. Antennas should be no closer than 6' apart.

❑ In a tree topology, repeating must be enabled on the 7510/752x/753x Access Point

that is connected to the network backbone, as well as all Extension Points.

❑ In order to ensure seamless roaming, use the same Domain and Security ID on all

Master 7510/752x/753x Access Points and Extension Point BSA radios.

❑ Verify all Masters listed in the First Master To Sync To, Second Master To

Sync To, and Third Master To Sync To configuration parameters are within

range of the Backbone radio by using the Master Search Tool and are listed

correctly.