User`s guide

34
BSA Radio Status Menu
The current Extension Point BSA radio parameters are displayed in this menu option. These
will match those in the Configuration Menu with the exception of MAC Optimize. If MAC
Optimize is configured as Auto, it will still appear in the Status Menu as Very Light, Light or
Normal, depending on the current number of synchronized radios.
The Radio Traffic Level and Radio Broadcast Level parameters show the current values
of these parameters which may cause an SNMP trap.
The Radio ROM version of the radio contained inside the BSA port of the Extension Point
is available for viewing.
If there is a parameter that will not take effect until the Extension Point or BSA radio is reset,
the Reset Required for Reconfiguration parameter will be set to “true.” For example,
after changing the radio Channel through the Configuration Menu, this parameter would be
set to “true.”
The Number of Radio Stations Connected parameter displays a count of the current
RangeLAN2 devices that are synchronized to this Extension Point and have communicated
within a specified time period. This time period is defined by the Aging Period parameter,
which can be configured under the Bridge Configuration Menu.
Backbone Radio Status Menu
The current Extension Point Backbone radio parameters are displayed in this menu option.
The Channel and Subchannel refer to those of the Master to which it is synchronized.
These parameters are not visible when the Backbone radio is not synchronized to a Master.
Synced-To Master Name is the name of the Master to which the Backbone radio is
synchronized. This parameter is not visible when the Backbone radio is not synchronized to a
Master.