User`s guide

29
To further improve the security of a wireless subnetwork, each unit requires the same Secu-
rity ID to establish communication. The Security ID is used on all RangeLAN2 products
and all Station Types. This ID is encrypted and stored in the Extension Point itself, not in
software. It cannot be accessed but you may change it. If you do change it, however, you
will need to change the Security ID on all other radios with which this one was communicat-
ing. The Security ID parameter can be up to 20 characters and is an empty string by default.
It is case sensitive.
Reset Radio allows you to reset the BSA radio contained in the Extension Point without
resetting the entire unit. This will cause any changes to the radio parameters which have not
yet taken effect (because the Delay Radio Reconfigure parameter is set) to take effect.
Backbone Radio Configuration Menu
emaNretemaraPegnaRtluafeD
evitartsinimdAtroPoidaR
sutatS
delbasiD/delbanEdelbanE
niamoD51-00
oTcnySoTretsaMtsriFsretcarahc11knalb
locotorPytiroirPhgiH
delbanE
eslaF/eurTeurT
erugifnoceRoidaRyaleDeslaF/eurTeurT
delbanEgnimaoReslaF/eurTeurT
DIytiruceSsretcarahc02-0knalb
This menu allows you to change the various wireless parameters for the Backbone radio.
The parameters with the same name as those under BSA Radio Configuration will not be
described again except to note changes.