User`s guide

25
You can enable or disable the Extension Point's ability to request its IP address from a
BOOTP server at boot time, and you can supply the IP address of that server.
You can enable or disable the ability to open a telnet session to the Extension Point and set a
password to control telnet access.
Bridge Configuration Menu
emaNretemaraPegnaRtluafeD
)sdnoces(doirePgnigA000,000,1-01003
dlohserhTparTegasUBDgnidrawroF)%(001-0001
The Aging Period parameter specifies the time after which the learned physical address of
the network node, which is stored in the Forwarding Database, is discarded. This data is
dynamically acquired by the Extension Point so that it can forward packets properly.
The Forwarding DB Usage Trap Threshold parameter specifies the percentage of learned
database entries after which an SNMP trap will be sent. The Extension Point can hold up to
2048 entries.