User`s guide

24
TCP/IP Configuration Menu
Use this option to change the TCP/IP parameters of the Extension Point.
emaNretemaraPegnaRtluafeD
sserddAPI-0.0.0.0
ksaMtenbuS-0.0.0.0
yawetaGtluafeD
sserddA
-0.0.0.0
taPTOOBdneS
emiTtooB
eslaF/eurTeurT
revreSPTOOB
sserddA
-*0.0.0.0
sseccAtenleTdelbasiD/delbanEdelbanE
drowssaPtenleT--
otdesusi0.0.0.0*
tsacdaorbadnes
IP Address indicates the IP address that will be assigned to the Extension Point. It must be
a unique number on the network. This parameter will not change until the Access Point is
reset.
Subnet Mask indicates the mask that will be used to determine what network the Extension
Point is on. This parameter will not change until the Extension Point is reset.
If a packet is destined for an IP host or node belonging to a different IP subnet, the Extension
Point will send IP packets to the Default Gateway (usually a router) for the packets to be
routed to the proper destination. This parameter will not change until the Extension Point is
reset.