User`s guide

6. Configuration Parameters

To configure the Extension Point, pick the Configuration option from the Main Menu. The

following diagram illustrates the software tree:

+ Not Accessible via Telnet

* Not configurable via SNMP

IP Address Subnet Mask Default Gateway Address Send BOOTP at Boot Time

BOO TP Server (0.0.0.0 for Broadcast) Telnet Access Telnet Password

TCP/IP Configuration Menu

Aging Period (seconds) Forwarding DB Usage Trap Threshold (%)

Bridge Configuration Menu

Radio Port Administrative Status Configured Domain Configured Channel Configured Subchannel

Configured Error Domain * Configured Error Domain Timer * Configured Master Name Repeating Enabled

Delay Radio Reconfigure MAC Optimize No Traffic Trap Period (seconds) Radio Traffic Trap Threshold (%)

Radio Broadcast Trap Threshold (%) Set Security ID Reset Radio

BSA Radio Configuration Menu

Radio Port Administrative Status Configured Dom ain Configured First M aster To Sync To High Priority Protocol Enabled

Delay Radio Reconfigure Roam ing Enabled Set Security ID Reset Radio

* Backbone Radio Configuration Menu

Enable/D isable S NMP Read-Only SNMP Community Read-Only SNMP Manager IP Address Read/W rite SNM P Community

Read/W rite SNM P Manager IP Address SNMP Trap Community Trap Target Address Enable/Disable Authentication Traps

SNM P Configuration M enu

+ Reset Extension Point to Factory Defaults

Dump Configuration to Screen

Configuration M enu

Statistics Menu

Status M enu

Download M enu

Diagnostics Menu

Reset Extension Point