User`s guide

❑ Proxim Enterprise MIB

The Proxim Enterprise MIB is supplied in ASN.1 format. It is available on the

Proxim BBS and Web site. The filename is AP7540.MIB. Follow the instructions

in your SNMP management package for incorporating enterprise-specific MIBs.

Modem Support

The Extension Point may be remotely configured via a dial-up modem. To allow for this type

of configuration:

1. Configure the modem from a terminal or terminal emulation program at 9600 bps.

2. Issue the following commands to the modem:

ATS0=1 (Auto-answer after 1 ring)

AT&D0 (Ignore DTR)

ATE0 (No local echo)

ATQ1 (Suppress result codes)

AT&W0 (Store configuration in non-volatile memory)

3. Attach the modem via a straight-through cable to the Extension Point.

4. From a remote modem, dial the phone number of the modem connected to the

Extension Point.

5. After the Extension Point's modem has answered the phone, press <Enter> on the

terminal connected to the remote modem until you see the configuration menu tree .