User`s guide

Note:

If the roaming PC must remain connected to the network, cells must

overlap for continuous coverage without gaps.

Roaming stations will only roam among Access Points and Extension Points

with the same Domain and Security ID.

Roaming Scenarios

The following roaming scenarios are supported by the Extension Point:

❑ Roaming among Extension Points

❑ Roaming among Extension Points and 7510/752x/753x Access Points

❑ Backbone radios of Extension Points themselves roaming among Extension Points

and 7510/752x/753x Access Points

How to Configure 7510/752x/753x Access Points When Using

Extension Points

The Repeating Enabled setting on the 7510/752x/753x Access Point defaults to False. If a

tree topology is desired, all 7510/752x/753x Access Points must change that setting to True.

If the default False setting is used, Extension Points will only be able to communicate in a

linear (one hop, multiple linear, building to building) topology.

You must have V1.3 or greater software on the 7510/752x/753x Access Point. Note that

the Access Point software version number is visible in the upper right corner of the menu.