Instruction manual

report that the slot containing the RangeLAN2 7420 PC Card is

empty. Remove the card and reinsert it.

However, if the computer reports that there is a device in the slot,

first highlight the entry and click <Stop> before removing the

card. You will be prompted by a dialog box when it is safe to

remove the card. Remove the card and reinsert it.

Windows 95/98 should now automatically detect the

RangeLAN2 7420 PC Card. Follow the instructions in Chapter 3

to install the RangeLAN2 driver.

Problem 2: Windows 95/98 does not automatically recognize the

RangeLAN2 7420 PC Card when I turned on the computer.

Solution 2: Windows 95/98 will automatically detect the

RangeLAN2 7420 PC Card as a “PROXIM-LAN PC CARD.”

If Windows does not recognize the card, check the Device Man-

ager for a “PROXIM-LAN PC CARD” entry in the Other De-

vices category and follow the procedure outlined in Solution 1.

If the card does not appear in either the Network Adapters cat-

egory or the Other Devices category of the Device Manager,

open the PC Card icon in the Control Panel to confirm that the

PCMCIA services recognizes that the RangeLAN2 PC Card is

properly inserted in the PCMCIA slot.

Problem 3: After installing the driver, the RangeLAN2 PC

Card’s entry in the Device Manager has a yellow exclamation

point next to it, as shown below.