Instruction manual

50
Guidelines for Roaming
❑ Roaming occurs between RangeLAN2 Access Points
and Extension Points. It does not occur between
RangeLAN2 Ethernet Adapters or RangeLAN2 adapter
cards that are installed in network file servers.
❑ All RangeLAN2 Access Points must have the same
Domain and Security ID.
❑ All RangeLAN2 Access Points should have a unique
Channel/Subchannel pair. Preferably, they should have
unique Channels. Use the Subchannel only when you
have used all 15 Channels in the same coverage area.
❑ All workstations with RangeLAN2 adapter cards are
configured as Stations with a Domain and Security ID
that match the values used by the RangeLAN2 Access
Points between which they will roam.
❑ For contiguous coverage, the cells created by
RangeLAN2 Access Points must overlap.
❑ Roaming will not occur across routers unless you use a
third party software utility like Mobile IP.