Instruction manual

The utilities will be added to a new folder under the Start Menu’s

Programs group called RangeLAN2 Utilities. This folder will

contain the RangeLAN2 Site Survey & Configuration Tool and

the RangeLAN2 Status Monitor. The RangeLAN2 Status Moni-

tor will also be added to the StartUp folder and will be launched

each time the operating system starts.

See Appendix A for more information on the RangeLAN2

Utilities.

Reinstalling the Windows NT 4.0 Driver

If at any time you need to reinstall the Windows NT driver,

follow these steps:

❑ Remove the “RangeLAN2 7400 PC Card Adapter”

entry from the Adapters list in the Network icon.

❑ Remove the driver file, RL2WINNT.SYS, from the

WINNT\SYSTEM32\DRIVERS directory.

❑ Remove the RangeLAN2 Status Monitor program from

the Control Panel’s Add/Remove icon to uninstall the

RangeLAN2 Utilities.

❑ Restart the computer with the RangeLAN2 7420 PC

Card inserted in the PCMCIA slot.

❑ Reinstall the driver following the above instructions.

❑ Reset the required networking parameters from within

the Control Panel’s Network icon (such as an IP Ad-

dress).

❑ Run SETUP.EXE from the Windows NT driver diskette

to install the RangeLAN2 Utilities.