Instruction manual

6. Place a check mark next to the “Floppy Disk Drives” option

and click <Next>, as shown below.

7. The New Hardware Wizard will prompt you once it has

located the RangeLAN2 driver. Click <Next> to install the

driver.

8. Click <Yes> to continue if the New Hardware Wizard

prompts you that the RangeLAN2 driver does not contain a

Microsoft Digital Signature.

9. Click <OK> if prompted to insert the Proxim RangeLAN2

CD-ROM and direct Windows to search for the

RL2API.SYS file on the floppy disk drive (typically, this is

drive A:), as shown below.