Instruction manual

The installation procedure will also install the RangeLAN2

Utilities and a protocol called the RangeLAN2 Driver API. This

protocol must be installed in order for the RangeLAN2 Utilities to

run under Windows 95 and 98. The utilities are added to a new

folder under the Start Menu’s Programs group called

RangeLAN2 Utilities. This folder contains the RangeLAN2 Site

Survey & Configuration Tool and the RangeLAN2 Status Moni-

tor. The RangeLAN2 Status Monitor is also added to the StartUp

folder and will be launched each time the operating system starts.

See Appendix A for more information on the RangeLAN2

Utilities.

Reinstalling the Windows 95/98 Driver

If at any time you need to reinstall the Windows 95/98 driver,

follow these steps:

❑ Remove the “Proxim RangeLAN2 7400 PC Card

Adapter” entry from the Control Panel’s Network icon.

❑ Remove the following RangeLAN2 files, if present:

C:\WINDOWS\INF\NETPROXM.INF

C:\WINDOWS\INF\RL2API.INF

C:\WINDOWS\INF\OTHER\RangeLAN2NETPROXM.INF

C:\WINDOWS\SYSTEM\RL2API.VXD

C:\WINDOWS\SYSTEM\RL2WIN95.SYS

C:\WINDOWS\START MENU\PROGRAMS\STARTUP\STATMON.LNK

C:\PROGRAM FILES\RL2\*.* (Remove all files and directory)

C:\START MENU\PROGRAMS\RL2\*.* (Remove all files and directory)