Instruction manual

7
2. Installing the RangeLAN2 Hardware
This chapter provides guidelines for installing the RangeLAN2
7420 Series PC Card and antenna. Install the hardware before
installing the network driver software.
Installing the RangeLAN2 7420 Card
The exact installation procedure for the card varies depending on
the model of computer you are using. The computer must have a
Type II PCMCIA slot. Install the RangeLAN2 7420 PC Card by
following the instructions in the hardware manual provided with
your computer for general installation of PCMCIA Type II cards.
After you install the RangeLAN2 7420 PC Card in your com-
puter, you can connect the antenna to the card. There are two
antenna choices for the RangeLAN2 7420 PC Card: the dipole
and the snap-on.
The following figures show a typical installation of the 7420 PC
Card with the dipole antenna and the snap-on antenna in a laptop
computer.
Figure 2
RangeLAN2 7421 Installation with Dipole Antenna