User`s guide

5. Configuring the RangeLAN2 7500

You need to configure the RangeLAN2 7500 if:

❑ There is more than one RangeLAN2 7500 on this

network, for example in a roaming environment

❑ You need to change the software default values, includ-

ing IP addresses

❑ You want to set security IDs on your network

There are three ways to configure the RangeLAN2 7500:

❑ Locally via a null modem cable and the RangeLAN2

7500 software

❑ Remotely across the network using the RangeLAN2

7500 software

❑ Using an SNMP management package

Locally (Out-of-band)

You may use the DB-9 Local Management Port on the back of

the RangeLAN2 7500 to configure the RangeLAN2 7500. To

locally configure the RangeLAN2 7500, you need a female to

female null modem RS-232 cable and a DOS-based PC with an

available serial port.