User's Manual

Installation 7
Hardware Installation
Follow these steps to install the Harmony 802.11a PCI Card in a computer’s PCI slot:
1. Turn off your computer and unplug its power cord from the wall outlet for safety
purposes.
2. Remove the computer cover.
3. Locate an unused PCI slot and refer to your PC’s manual for instructions on how
to remove the plate that covers the slot (if applicable).
4. Align the Harmony 802.11a PCI Card over the empty slot.
5. Firmly insert the card into the slot, as illustrated below.
6. Secure the card’s metal bracket to the computer following the directions
provided in your PC’s manual.
7. Replace the computer cover.
8. Plug the computer’s power cord back into the wall outlet.
9. Place the antenna with the longer cable on top of your desk, computer, or
monitor.
10. Turn on the computer.