Installation guide
Table Of Contents
- Preface
- Introduction
- Management and Monitoring Capabilities
- Device Initialization
- Basic Configuration
- Device Configuration
- Device Management
- Device Monitoring
- Troubleshooting
- Frequency Domains and Channels
- Bootloader CLI and Scan Tool
- ASCII Character Chart
- Frequently Asked Questions (FAQs)
- Glossary
- Abbreviations
- Statement of Warranty
- Technical Services and Support
Device Monitoring
ORiNOCO® 802.11n Access Points - Software Management Guide 122
Figure 7-8 IP ARP Statistics
The IP ARP Table contains the following information:
Click Refresh, to view updated IP ARP Table statistics and click Clear, to clear the IP ARP Table statistics.
7.5.2 Internet Control Message Protocol (ICMP) Statistics
The ICMP Statistics attributes enable you to monitor the message traffic that is received and transmitted by the device.
To view ICMP statistics, navigate to MONITOR > Network Layer > ICMP Statistics. The ICMP Statistics screen appears.
Figure 7-9 ICMP Statistics
Parameter Description
Index Specifies the interface type.
Physical Address Specifies the MAC address of a node on the network.
Net Address Specifies the corresponding IP address of a node on the network.
Type Specifies the type of mapping, that is, Dynamic or Static.