Installation guide

Device Management
ORiNOCO® 802.11n Access Points - Software Management Guide 110
Click OK and COMMIT, to save the configured parameters.
: Configure the parameters, namely, Primary Server IP Address / Domain Name, Secondary Server IP Address / Domain
Name, Time zone and Day Light Saving Time, only when the SNTP status is enabled.
6.5 Access Control
The Management Access Control feature allows you to manage the device from the specified host.
To configure, navigate to MANAGEMENT > Access Control. The Management Access Control Table screen appears.
Figure 6-21 Management Access Control Table
Parameter Description
Enable SNTP Status Specifies the status of the SNTP feature on the device.
Select the Enable SNTP Status checkbox to synchronize the date and time of the device
with the SNTP time server.
Primary Server IP
Address / Domain
Name
Specifies the host name or the IP address of the primary SNTP server.
To configure, enter the Primary Server IP Address/Domain Name.
Secondary Server IP
Address / Domain
Name
Specifies the host name or the IP address of the secondary SNTP server.
To configure, enter the Secondary Server IP Address/Domain Name.
Time Zone Specifies the time zone set for the SNTP.
To configure, select the desired time zone from the drop down menu
Day Light Saving
Time
Specifies the number of hours adjusted for the Daylight Saving Time.
To configure, select the desired Day Light Saving Time from the drop down menu.
Current Date/Time Specifies a read-only parameter which displays the system current date and time.
– If SNTP is not enabled, the current date and time are automatically generated from the
local system.
– If SNTP is enabled, it displays the time, which the device has obtained from the SNTP
server.