User guide

Using Web Interface to Manage the Access Point AP-8000 User Guide

Configuring the Device

Figure 6-17 MAC ACL Add Row Page

5. Enter the MAC Address, Comment if you have any, and Entry Status of the MAC Address, then click Add. The

maximum number of MAC addresses that can be added is 64.

QoS

Perform the following procedure to configure the Station and AP EDCA tables:

EDCA

1. Navigate to Configuration > QoS > EDCA.

Figure 6-18 QoS EDCA Tables

2. Click Edit and configure the following parameters in each table:

• Access Category: It is a read-only parameter and indicates the Access Category being defined:

— Background

— Best Effort