User guide

Using CLI to Manage the Access Point AP-8000 User Guide
Monitoring the Device Using CLI Commands
141
Type : ethernet-csmacd
Mtu : 1500
Speed : 100000000
Physical Address : 00:21:86:51:e4:c5
Admin Status : up
Operational Status : up
Last Change : 0-00:00:21.00
In Octets : 0
In Unicast : 0
In Non Unicast : 0
In Discards : 0
In Errors : 0
In Unknown Protos : 0
Out Octets : 0
Out Unicast Packets : 0
Out Non Unicast Packets : 0
Out Discards : 0
Out Errors : 0
Outqlen : 0
Specific : 0.0
Display the ICMP Statistics
This command provides statistical information for both received and transmitted messages directed to the AP.
Device-Name# show statistics icmp
// ICMP Configuration //
In Messages : 12
In Errors : 0
In Destinationunreachs : 2
In TimeExcds : 0
In ParmProbs : 0
In SrcQuenchs : 0
In ReDirects : 0
In Echos : 2
In Echo Reps : 8
In TimeStamps : 0
In TimestamReps : 0
In AddrMasks : 0
In AddrMaskReps : 0
Out Msgs : 4
Out Errors : 0
Out DestUnreachs : 2
Out TimeExcds : 0
Out ParmProbs : 0
Out SrcQuenchs : 0
Out Redirects : 0
Out Echos : 0
Out EchoReps : 2
Out TimeStamps : 0
Out TimestampReps : 0
Out AddrMasks : 0
Out AddrMaskReps : 0
Display the IPARP Statistics
This command provides information based on the Address Resolution Protocol (ARP), which relates MAC Address and
IP Addresses.