User guide

10
AP- 8000 User Guide
2
Installation and Initialization
In this chapter:
• Hardware Overview
– LED Indicators
– Antennas
– Power Socket
– Reset
– Reload
– Description of the AP-8000 Unit
• Prerequisites
• System Requirements
• Product Package
• Optional Accessories
• Hardware Installation
– Attach the Cables
– Power on the Unit
– Install the Antenna
– Initialization
• Initialization
– Using ScanTool
• Installing the Software
– Install Software Using TFTP Server
Hardware Overview
The Access Point supports dual radio operations using the 2.4 GHz and 5 GHz, and has six antenna connectors. The
Access Point support dual radio operation using 2.4 GHz and 5 GHz. It contains two 802.11a/b/g/n radios that can
operate independently on 2.4 GHz and 5 GHz. It contains 6 antennas, 3 for each radio.
LED Indicators
The top panel of the AP-8000 has the following LED indicators:
• The Power LED provides whether the device is switched on/off.
• The Ethernet LED signals Ethernet traffic on the wired Ethernet LAN
• The Wireless Interface (Radio)1 LED provides the status and the speed on the wired Ethernet LAN.
• The Wireless Interface (Radio)2 LED provides the status of the wireless radio.