Access Point User Guide

Advanced Configuration AP-700 User Guide

QoS

1. Click Configure > QoS > EDCA.

Figure 4-32 EDCA Tables

2. Click Edit and configure the following parameters in each table:

NOTE: Changes to EDCA parameters require a reboot of the AP to take effect.

• Index: read-only. Indicates the index of the Access Category (1-4) being defined.

• CWMin: minimum Contention Window. Configurable range is 0 to 255.

• CWMax: maximum Contention Window. Configurable range is 0 to 65535.

• AIFSN: Arbitration IFS per access category. Configurable range is 2 to 15.