Network Router User Manual
42
Performing Advanced Configuration
Figure 4-4 Link Integrity Configuration Screen
Interfaces
The Interfaces tab contains the following sub-tabs:
– Operational Mode
– 8Wireless-A and Wireless-B
– Ethernet
From these sub-tabs, you configure the Access Point’s operational mode, wireless interface settings and Ethernet
settings. You may also configure a Wireless Distribution System (WDS) for AP-to-AP communications.
For the wireless interface configuration, refer to the wireless parameters below that correspond to your radio type.
– Wireless A (802.11a)
– Wireless (802.11b)
– Wireless (802.11b/g)