Install guide

All rights reserved Page 13
Status Power Wireless Link Ethernet Link
WORP linked,
no trafc on
interface
US: Solid green
or yellow
EU/WD: Solid
green or yellow
Blinking green or
yellow
Off: No Ethernet
Solid amber: 10
Mbps
Solid green or
yellow: 100 Mbps
WORP linked,
normal operation;
passing trafc
US: Solid green
or yellow
EU/WD: Solid
green or yellow
Blinking green or
yellow
Off: No Ethernet
Solid amber: 10
Mbps
Solid green or
yellow: 100 Mbps
System failure Solid Red N/A N/A
Bootloader mode Permanent Solid
Amber
N/A N/A
Notes:
“Blinking amber/green” indicates that the LED alternates between amber
and green blinks.
“Blinking amber/yellow” indicates that the LED alternates between amber
and yellow blinks.
“Solid green or yellow” indicates that the LED displays either solid green or
solid yellow, depending on the hardware variant.
“Blinking green or yellow” indicates that the LED blinks either green or
yellow, depending on the hardware variant.
If a wireless link is not established with the BSU, adjust the direction of the unit
so that the integrated antenna is more precisely aimed toward the BSU. When
the Power LED is solid green or solid yellow, the link is correctly established.
▪
▪
▪
▪