Install guide

Step 4: View LEDs/Adjust Mounting

LEDs are located in the cable compartment.

When the unit is powered on, the 5012-SUR performs startup diagnostics.

When startup is completed, the LEDs show the operational state of the 5012-

SUR.

The following table shows the status of the LEDs when the 5012-SUR is

operational.

Status Power Wireless Link Ethernet Link

Starting up Three red blinks

followed by

temporary solid

amber

N/A N/A

Radio scanning US: Blinking

amber/green or

amber/yellow

EU/WD: Blinking

green or yellow

N/A N/A

WORP link is up US: Solid green

or yellow

EU/WD: Solid

green or yellow

Blinking green or

yellow

Off: No Ethernet

Solid amber: 10

Mbps

Solid green or

yellow: 100 Mbps

No WORP link US: Blinking

amber/green or

amber/yellow

EU/WD: Blinking

green or yellow

N/A Off: No Ethernet

Solid amber: 10

Mbps

Solid green or

yellow: 100 Mbps