User's Manual

14
1. Windows 98/ME users: confirm that the Windows cabinet (CAB) files are
installed on the computer. The CAB files are typically located in
C:\WINDOWS\OPTIONS\INSTALL\ or C:\WINDOWS\OPTIONS\CABS\.
2. Windows 98/ME users: if the computer does not have the CAB files
installed, copy the Win98 or Win9x folder found on the Windows
CD-ROM to a temporary folder on the computer.
3. Copy the contents of the Symphony Installation CD-ROM to a temporary
folder on the computer. Alternatively, you may download the software
from the Symphony Web site at http://www.proxim.com/symphony/.
4. Follow the installation instructions contained in this chapter. When the
instructions call for either the Windows CD or the Symphony Installation
CD, search the temporary folders you created in Steps #2 and 3 above.
5. When the installation is complete, remove the temporary folders you cre-
ated in Steps #2 and 3 above from the computer’s hard drive.
Installation Procedure
Follow these steps to install a Symphony HomeRF adapter:
Note:
Make sure that the Symphony HomeRF Base Station is powered
on before proceeding.
1. Insert the Symphony Installation CD; the Symphony Installation program
will launch automatically, as shown in the example on the next page. If
the program does not launch, run SETUP.EXE from the CD-ROM.
Note:
If you inserted the Symphony HomeRF adapter into the com-
puter before running the Symphony Installation program, refer
to Chapter 9 of the Symphony HomeRF Adapters User’s
Manual for installation instructions.