User's Manual
Table Of Contents
- Contents
- 1. Introduction
- The Harmony Family
- The Product Package
- System Requirements
- 2. Installation
- Driver Installation
- Hardware Installation
- Software Configuration
- Removing the CompactFlash Card
- 3. Wirefree Topologies
- Mobile Connectivity to a Desktop Computer
- Mobile Connectivity to a SOHO Network
- Mobile Connectivity to a Corporate Network
- Guidelines for Roaming
- 4. Configuration Parameters
- Operating Mode
- OpenAir Radio Communication
- OpenAir Masters and Stations
- OpenAir Channel and Subchannel
- OpenAir Software Parameters
- Domain
- Security ID
- Roam Config
- Inactivity Timeout
- HomeRF Radio Communication
- Security ID
- 5. Proxim Status Utility
- Status Monitor
- Status
- Configuration
- Advanced
- About
- 6. Performance Hints
- Microwave Ovens
- Range
- A Note Concerning Inactivity Timeout
- 7. Troubleshooting
- How to Obtain Help with Your LAN Installation
- Application Tips
- ActiveSync
- Pocket Internet Explorer
- Common Technical Support Questions
- A. Specifications
- B. Parameters
- C. How to Reach Technical Support
19
Removing the CompactFlash Card
In general, Proxim recommends that you leave the Harmony
OpenAir CompactFlash Card in the iPAQ’s CompactFlash
Expansion Pack.
If the iPAQ prompts you to remove the CompactFlash Card so
that new settings can take effect, do not remove the card from
the CompactFlash slot. Instead, remove and reinsert the iPAQ
into the CompactFlash Expansion Pack. Alternatively, reset the
device by pressing the reset button on the bottom of the unit.
The iPAQ’s CompactFlash Expansion Pack does not have an
eject button so you may have difficulty removing the card from
the slot.
If you need to remove the Harmony OpenAir CompactFlash
Adapter from the slot, hold onto the card’s antenna and gently
pull the CompactFlash Card out of the slot.