User's Manual
Table Of Contents
- Contents
- 1. Introduction
- The Harmony Family
- The Product Package
- System Requirements
- 2. Installation
- Driver Installation
- Hardware Installation
- Software Configuration
- Removing the CompactFlash Card
- 3. Wirefree Topologies
- Mobile Connectivity to a Desktop Computer
- Mobile Connectivity to a SOHO Network
- Mobile Connectivity to a Corporate Network
- Guidelines for Roaming
- 4. Configuration Parameters
- Operating Mode
- OpenAir Radio Communication
- OpenAir Masters and Stations
- OpenAir Channel and Subchannel
- OpenAir Software Parameters
- Domain
- Security ID
- Roam Config
- Inactivity Timeout
- HomeRF Radio Communication
- Security ID
- 5. Proxim Status Utility
- Status Monitor
- Status
- Configuration
- Advanced
- About
- 6. Performance Hints
- Microwave Ovens
- Range
- A Note Concerning Inactivity Timeout
- 7. Troubleshooting
- How to Obtain Help with Your LAN Installation
- Application Tips
- ActiveSync
- Pocket Internet Explorer
- Common Technical Support Questions
- A. Specifications
- B. Parameters
- C. How to Reach Technical Support
17
26. Enter the network’s Security ID in the field provided and
click <OK>.
27. If you set the Operating Mode to Dual or OpenAir, select
the OpenAir network’s Domain number from the
drop-down list.
28. Tap <OK> to close the Proxim Status screen.
The Proxim Status utility will now reset the card’s parameters.
Be patient while the driver reloads; this can take up to 20
seconds.
29. Tap <OK> when prompted that the new settings will take
effect the next time the adapter is used.
30. Remove and reinsert the iPAQ into the Compact Flash
Expansion pack or reset the iPAQ for these changes to
take effect.
31. Double-tap the Status Monitor icon to launch the Proxim
Status screen and confirm that the card is synchronized to
the appropriate OpenAir or HomeRF device.
In the following example, the OpenAir CompactFlash
Card is synchronized to a Harmony OpenAir Access
Point.