User's Manual
Table Of Contents
- Contents
- 1. Introduction
- The Harmony Family
- The Product Package
- System Requirements
- 2. Installation
- Driver Installation
- Hardware Installation
- Software Configuration
- Removing the CompactFlash Card
- 3. Wirefree Topologies
- Mobile Connectivity to a Desktop Computer
- Mobile Connectivity to a SOHO Network
- Mobile Connectivity to a Corporate Network
- Guidelines for Roaming
- 4. Configuration Parameters
- Operating Mode
- OpenAir Radio Communication
- OpenAir Masters and Stations
- OpenAir Channel and Subchannel
- OpenAir Software Parameters
- Domain
- Security ID
- Roam Config
- Inactivity Timeout
- HomeRF Radio Communication
- Security ID
- 5. Proxim Status Utility
- Status Monitor
- Status
- Configuration
- Advanced
- About
- 6. Performance Hints
- Microwave Ovens
- Range
- A Note Concerning Inactivity Timeout
- 7. Troubleshooting
- How to Obtain Help with Your LAN Installation
- Application Tips
- ActiveSync
- Pocket Internet Explorer
- Common Technical Support Questions
- A. Specifications
- B. Parameters
- C. How to Reach Technical Support
14
11. Select the Name Servers tab.
12. Enter the IP addresses for your network’s DNS (Domain
Name System) and WINS (Windows Internet Naming
Service) servers, if applicable. Contact your network
administrator for assistance.
Note:
If you have a DHCP server on the network, you may
not need to configure these server addresses. In
general, a DHCP server will automatically assign
DNS and WINS server addresses.
13. If you do not have a WINS server on the network but you
want to create a wireless ActiveSync connection over the
network, enter the host computer’s IP address in the
WINS field.
In the following example the host computer that has an
ActiveSync partnership with the iPAQ has an IP address
of 192.168.0.2.