User`s guide

Appendix C

RJ-45 Connector Pin-outs

All of the ports on the front of the Harmony Power System are configured as “route

through” for all 4 data wires (pins 1, 2, 3, and 6), as shown in the following tables.

Note: Pin assignments are identical for 10Base-T and 100Base-TX RJ-45

connectors.

RJ-45 Input Plug (per channel) — Hub/Switch Side

Pin Number Description

1 Tx Data Signal to Hub/Switch

2 Tx Data Signal to Hub/Switch

3 Rx Data Signal from Hub/Switch

4Unused

5Unused

6 Rx Data Signal from Hub/Switch

7Unused

8Unused

9 Connector shielding