User`s guide

Installing the Harmony Power System 18
Step 3: Power Up the Harmony Power System
Follow these steps to power up the Harmony Power System:
1. Plug the power cord into the power socket located on the rear panel of the
Harmony Power System.
2. Plug the other end of the power cord into an AC power outlet.
Once power has been applied, the Harmony Power System will run through its Power
On Self Test, which takes approximately 15 seconds to complete. During the self test,
the Power LED is amber.
Note: The Harmony Power System has no ON/OFF switch; to turn off the unit, dis-
connect the power cord from the AC power outlet.