User`s guide

51
Parameters
Note: These are the parameters that are available when the Harmony 802.11a
Access Point is operating in Independent mode.
Parameter Range Default
Use DHCP Yes, No Yes
System Access Password Up to 12 characters default
IP Address - Assigned by DHCP server
Subnet Mask - Assigned by DHCP server
Default Gateway - Assigned by DHCP server
Use SNMP Yes, No No
Read-Only Community - public
Restrict Read-Only
Community to IP
- 0.0.0.0 (unrestricted)
Read-Write Community - private
Restrict Read-Write
Community to IP
- 0.0.0.0 (unrestricted)
Trap Community - trap
Send Traps to IP - 0.0.0.0 (traps disabled)
Enable 2X Mode
(Not available in Europe,
Japan, or Singapore)
Enabled, Disabled Disabled
Channel
(Models 8569 & 8570)
U.S. & Canada: In 802.11a mode:
Channels 36, 40, 44, 48, 52, 56,
60, & 64; in 2X mode: Channels
42, 50, & 58
Europe: Channels 36, 40, 44, 48,
52, 56, 60, & 64
Japan: Channels 34, 38, 42, & 46
Singapore: Channels 36, 40, 44,
& 48
Varies by country
Channel
(Model 8571)
U.S. & Canada: In 802.11a mode:
Channels 56, 60, & 64;
in 2X mode: Channel 58
56