System information

The MIB Walker 387
View MIB Tree
Selecting the VIEW TREE button from the Walk Agent MIB dialog displays the Walk
Agent MIB Tree Viewer. The Walk Agent MIB Tree Viewer displays the structure,
although not the values, of the discovered MIB tree.
Setting Values
One of the main uses of the MIB Walker and the Walk Agent List Viewer is to permit you
to explore the SNMP agent by setting values to see what effect different values have on
the actual device and to be sure that objects are writable.
1. To set a value, select any object on the Walk Agent List Viewer and click on the S
ET
V
ALUE button. The Set Value dialog will be displayed.
Before attempting to make any changes, note the present value, so that you
can restore the device to its original state.
2. Enter an appropriate real or test value into the Value textbox.
3. Click the S
ET VALUE button. SNMP Extension will attempt to set the given OID to
the entered value.
4. If the attempt to set the value succeeds, the dialog box will be redisplayed with the
Status line reading “Done.”
If in Tree view,
“View List”
will be
displayed
S
ET VALUE
button