System information

The MIB Walker 385
SNMP MIB Walker
The MIB Walker is accessed by selecting an SNMP device from the SNMP Agents pane
and clicking
Tools > SNMP MIB Walker.
1. To walk an agent MIB, right-click on the desired SNMP Agent in the SNMP Agent
pane and select W
ALK NETWORK DEVICE MIB.
2. By default, the initial OID for the walk will be 1.3.6.1.4.1. If you prefer to have your
MIB walk begin from another OID, enter it in the “Initial OID” textbox or use the
dropdown arrow if you’ve recently used another starting point. Note that
1.3.6.1.4.1 is
the “root” of the proprietary part of the MIB tree.
A walk from 1.3.6.1.4.1 will give you
information on the proprietary OIDs. To get information from the standard OIDs, start
the walk at 1.3.6.1.2.1.
3. Click the WALK! button to start.
Initial
OID
Selected
agent