System information

Adding, Editing, or Deleting an SNMP Device 267
Trap Destinations Tab
This tab lets you the define SNMP management systems that will receive traps. To add a
manager to the list, click the Add... button. Both the Add and Edit let you enter the IP
address of the manager you wish to define as a trap destination, as well as its community
string and port number. The Refresh button causes Observer to query the RMON probe
and forward any trap conditions to the management systems listed in the dialog.
Adding, Editing, or Deleting an SNMP Device
See Adding, Modifying, and Deleting SNMP Agents on page 339.
Update Switch Scripts
This option updates all switch scripts located at each Probe.
Updating All Probes to Current Observer Version
Choose this option to update all licensed Probes to the current Observer version. After you
choose the option, a confirmation dialog is displayed. After you choose Yes, all the
licensed Observer Probes connected to this Observer console will be updated
automatically.
Resetting SNMP Device Alarm Counters
Actions>Reset SNMP Device Alarm Counters resets the alarm counters for the
currently active SNMP device. To reset alarm counters for all SNMP Devices, choose
Actions->Reset All SNMP Devices Alarm Counters.