System information

Filter Setup for Selected Probe 229
4. Choose IP as the address Type, and Single address as the range for both address 1 and
address 2. Select (or enter) the IP addresses of the devices you are interested in
monitoring from the Address drop-down list. Set the direction arrow to capture
packets going both directions. Click OK to save the rule changes and close the setup
dialog. The Rule Editor should now look something like this:
5. Click OK to save the filter.
Changing a Rule Type (Edit as...)
Suppose you want to filter for error packets instead of by address. To change any rule’s
type, right-click and choose Edit as... to display the list of rule types which you can
choose from.
Filter Shortcuts
Most Observer displays that include station lists or decoded packets allow you to jump to
the filter setup screen through the right-click menu. The filter setup screen is automatically
filled in with the relevant rule set. For example, from the Discover Network Names list