System information

Filter Setup for Selected Probe 221
The following sections detail all the types of filter rules and their settings.
Specify a WAN DLCI by number.
Specify a WAN Port by number.
Lets you filter for direction (DCE or DTE or both), and logi-
cally chain tests for forward congestion packets, backward
congestion packets, and discard eligibility.
Enter or select a hardware address that corresponds to the
wireless Access Point you wish to capture traffic from.
Select a wireless data rate, and whether you want to filter for
packets traveling at, under, or over that rate.
Select a wireless channel, and whether you want to filter for
packets received from channels less than, greater than, or
equal to that channel.
Select a wireless signal strength, and whether you want to fil-
ter for packets received at, under, or over that signal
strength.
Rule Type Usage