System information

SNMP MIB Editor 209
SNMP MIB Editor
See “The MIB Editor” on page 352.
SNMP MIB Walker
Lets you walk a MIB to determine what objects it contains.
Menu Path
Tools->SNMP MIB Walker
Purpose
The MIB Walker automatically browses through the hierarchy of an SNMP Management
Information Base (MIB) and displays what objects it contains.
To open SNMP MIB Walker, select
Tools > SNMP MIB Walker. If this is the first time you
have run the mode, the setup screen is displayed, which allows you to select and configure
MIB Walker profiles
:.
Select a device or click New Device... to configure a new device. The MIB walker profile
creation dialog includes the following controls:
• Profile name--choose a name that is descriptive enough to be meaningful to you later.
• “IP Address” textbox—allows you to enter the IP address to be used for the profile.
• “Community” textbox—allows you to enter the community for the profile (public or
private).
• “SNMP version” dropdown—allows you to select the SNMP version.
• “Initial OID” textbox—allows you to enter the initial OID.
• “Comment” textbox—allows you to enter comments regarding this walk.