System information

WAN Delay Analysis 187
When you select the Connection Dynamics button, the following items are displayed
in the Header bar:
• File 1—displays the number of packets and connections analyzed for File 1.
• File 2—displays the number of packets and connections analyzed for File 2.
• WAN IP Connections—displays the number of WAN IP connections analyzed.
• Status—displays the current status of the analysis.
Settings:
• “File Synchronization Offset”—the offset is computed to compensate for the time
zone and processor clock differences between the systems being analyzed.
• “User Defined Offset” spinbox—allows you to add an additional time offset to the
File Synchronization Offset described above.
WAN Connections:
• “Conn” checkbox—allows you to select which connection you wish to analyze.
• File 1—displays the IP addresses of the first packet.
• File 2—displays the IP addresses of the second packet.
• File 1 Pkts—displays the number of packets in File 1.
• File 2 Pkts—displays the number of packets in File 2.
• Type—displays the connection type between File 1 and File 2.
The following items are displayed in the main table:
• Packet comparison—displays the packets and common connections; you may click
on a packet to view the packet flow.