System information

150 The Statistics Menu
3. Once you have set which alarms you would like to activate, select the “Triggers”
tab to configure the specific Alarm options.
4. A separate action can be defined for each alarm or a single action can be set for
all alarms. The checkbox on the “Alarm List” tab defines which trigger setting
options will be displayed on the “Triggers” tab. see “Trigger Settings” on
page 150.
5. Click on the “Actions” tab to display the Actions Settings dialog. see
“Fragmented IP Packets” on page 153.
Trigger Settings
Average Packet Size
This trigger is used to identify average packet sizes below a certain size over a period
of time.
• “Trigger if below average packet size” textbox—allows you to set the size, in
bytes, of the minimum packet size to monitor.
• “Minimum number of packets (trigger level)” textbox—allows you to set the
smallest number of packets in the averaging period that will be provided as data
for the trigger. For example, if you set the minimum number of packets to 1000
and the averaging period to 10 seconds, then if less than 1000 packets are seen in