Installation guide

Wireless Guide 61

Installing the Cisco Aironet Adapter / Driver

First Time Installation

For Windows 2000, you install an adapter for the first time by inserting the card

in the PC and using the Found New Hardware Wizard.

To install the Aironet 340/350 adapter and driver in Windows 2000 for

the first time:

1 Remove any installed copies of the Aironet Client Utility.

2 Reboot the computer.

3 After installing the Sniffer software, log in to Windows 2000 as an

Administrator.

4 Insert the Aironet 340/350 wireless adapter in an available Type II PC

card slot on the target machine.

Windows 2000 presents a Wizard to help you install a new driver for the

Aironet 340/350 adapter.

NOTE: If Windows 2000’s plug-and-play feature automatically installs a

driver for the adapter instead of starting the Found New Hardware

Wizard, turn to Updating Existing Drivers on page 62 to update the

existing driver

Click Next.

The Install Hardware Device Drivers window appears.

6 Select the Search for a suitable driver for my device option and click

Next.

The Locate Driver Files window appears.

7 Check only the Specify a location option and click Next.

The Found New Hardware Wizard prompts you to supply a path to the

device driver.

8 Click Browse, navigate to the Cisco340\Win2K or Cisco350\Win2K

subdirectory where the driver files are installed, and click Open.

Specify the Cisco340\Win2K driver directory for either the Cisco 340 or

the Cisco 345 adapter.

NOTE: The location for Sniffer Portable drivers is

C:\Program Files\NAI\SnifferNT\Driver\en\Cisco340\Win2K or

C:\Program Files\NAI\SnifferNT\Driver\en\Cisco350\Win2K.