Installation guide

Chapter 6
56 Sniffer Technologies
8 Install the driver provided by Network General for the Aironet 340
adapter:
a Start the MS-Windows Network control panel by right-clicking on
the Network Neighborhood icon on the desktop and selecting the
Properties command from the menu that appears.
b Click the Adapters tab of the Network control panel.
c In the Adapters tab, click Add.
d The Select Network Adapter dialog box appears. Click Have Disk.
e In the Insert Disk dialog box, supply the path to the
Cisco340\WinNT subdirectory, and click OK.
NOTE: The location for Sniffer Portable drivers is
C:\Program Files\NAI\SnifferNT\Driver\en\Cisco340\WinNT or
C:\Program Files\NAI\SnifferNT\Driver\en\Cisco350\WinNT.
f
In the Select OEM Options dialog box, select the driver
corresponding to the type of Cisco Aironet card you installed (for
example,
Cisco 340 Series PCMCIA Wireless LAN Adapter) and
click OK.
The Aironet Wireless Communications, Inc. Adapter Setup dialog
box appears.
Figure 6-2. The Aironet Wireless Communications Adapter Setup Dialog Box
g Set the options in the Aironet Wireless Communications, Inc.
Adapter Setup dialog box: