Installation guide

Wireless Guide 49
Installing the Spectrum 24 Adapter / Driver
16 When you have finished configuring the options in the Symbol
Spectrum24 WLAN Easy Setup dialog box, click OK.
The Wizard installs the selected driver. When it has finished, it presents
the Completing the Found New Wizard window.
17 Click Finish to finish the installation.
18 Restart the computer.
19 Verify that the correct driver is installed correctly by examining its
Device Name entry in the Network and Dial-Up Connections window:
a Right-click the My Network Places icon on the desktop and select
Properties.
b Select the entry in the Network and Dial-Up Connections window
for the wireless adapter and verify that the entry in the Device
Name column appears in the following format:
Sniffer (vendor name) - card description
If the driver for the wireless adapter does not appear in this format,
you will need to repeat the installation procedure to install the
driver.
20 At this point, the Symbol Technologies Spectrum 24 wireless adapter
should be installed with the Network General driver in Windows 2000.
See Creating a Local Agent to Use the Wireless LAN Adapter on page
79 to create a new local agent in the Sniffer software to use the adapter.