Installation guide

Chapter 5
38 Sniffer Technologies
b In the dialog box that appears, click the Resources tab. The IRQs
currently in use on the PC are listed by number.
Figure 5-1. Finding Available Resources for the Spectrum 24 Wireless LAN Adapter
c The Spectrum 24 card can use IRQs 2 through 15. Determine if
one of these IRQs is available and write down its number for later
use.
NOTE: If all of these IRQs are already in use, you will need to make
one of them available for the Spectrum 24 adapter by uninstalling a
conflicting device.
d
Click I/O Port at the bottom of the Windows NT Diagnostics
window (Figure 5-1). The I/O Port windows currently in use on the
PC are listed.
e Find an available I/O Port and write down its number for later use.
f Click Memory at the bottom of the Windows NT Diagnostics
window (Figure 5-1). The Memory Base Addresses currently in
use on the PC are listed.
g Find an available Memory Base Address and write down its
number for later use.