Installation guide

Wireless Guide 37
5
Installing the Spectrum 24
Adapter / Driver
Overview
This chapter describes how to install the Spectrum 24 Model 4121 adapter
card and driver for the Sniffer software:
 Installing the Spectrum 24 Model 4121 in Windows NT 4.0 on page 37
 Installing the Spectrum 24 Model 4121 Adapter in Windows XP on page
43
 Installing the Spectrum 24 Model 4121 in Windows 2000 on page 45
 Using the Spectrum 24 as a Normal Network Adapter on page 50
 Spectrum 24 Installation Notes and Issues on page 51
Installing the Spectrum 24 Model 4121 in
Windows NT 4.0
This section describes how to install the Spectrum 24 adapter and driver on a
Windows NT 4.0 system.
To install the Spectrum 24 adapter and driver in Windows NT 4.0:
1 After installing the Sniffer software, remove any installed adapter
drivers (either a previous version of the Sniffer driver or another
vendor’s driver) for the Spectrum 24 adapter. Remove drivers in
Windows NT from the Adapters tab of the Network control panel.
2 Restart the computer.
3 Log in to Windows NT as an Administrator.
4 Insert the Spectrum 24 wireless adapter in an available Type II PC card
slot on the target machine.
5 Locate an available IRQ and IO Base Address:
a Select the Windows NT Diagnostics program from the
Administrative Tools (Common) program group under the Start
menu.