Installation guide

Chapter 4
32 Sniffer Technologies
First Time Installation
For Windows 2000, you install an adapter for the first time by inserting the card
in the PC and using the Found New Hardware Wizard.
To install the Enterasys RoamAbout adapter and driver in Windows
2000 for the first time:
1 Ensure the Sniffer software is properly installed.
2 Log into Windows 2000 as an Administrator.
3 Insert the Enterasys RoamAbout wireless adapter in an available Type
II PC card slot on the target machine.
Windows 2000 presents a Wizard to help you install a new driver for the
Enterasys RoamAbout adapter.
NOTE: If Windows 2000’s plug-and-play feature automatically installs a
driver for the adapter instead of starting the Found New Hardware
Wizard, turn to Updating Existing Drivers on page 33 to update the
existing driver.
4
Click Next.
The Install Hardware Device Drivers window appears.
5 Select the Search for a suitable driver for my device option and click
Next.
The Locate Driver Files window appears.
6 Check only the Specify a location option and click Next.
7 Click Browse, navigate to the EnterasysRoamAbout\Win2K
subdirectory where the driver files are installed, and click Open:
NOTE: The default Sniffer Portable location for all drivers: C:\Program
Files\NAI\SnifferNT\Driver\en
8
Click OK.
9 Click OK in the Install from Disk dialog box.
Windows 2000 scans for the driver and presents the Driver Files
Search Results window indicating that it has found the driver you
specified in the previous step.
10 Click Next on the Driver Files Search Results window.