Installation guide

Wireless Guide 19
Installing the ORiNOCO Gold Adapter / Driver
15 Click OK in the Adapter Properties dialog box.
16 For Sniffer Portable users: If you did not uninstall the QoS Packet
Scheduler Service during the installation of the Sniffer Portable
software, you should disable it for this adapter now. See the Sniffer
Portable Installation Guide for detailed information.
17 Create a new local agent in to use the adapter. See Creating a Local
Agent to Use the Wireless LAN Adapter on page 79.
Windows 2000
This section describes how to install the ORiNOCO Gold adapter and driver on
a Windows 2000 system. The procedure is somewhat different whether you
are updating an existing driver for the wireless adapter (either a previous
version of the Sniffer driver or another vendor’s driver) or installing the adapter
and driver for the first time. Use the appropriate procedure below.
 First Time Installation on page 19
 Updating Existing Drivers on page 20
First Time Installation
For Windows 2000, install the adapter for the first time by inserting the card in
the PC and using the Found New Hardware Wizard.
To install the ORiNOCO Gold adapter and driver in Windows 2000 for
the first time:
1 After installing the Sniffer software, log into Windows 2000 as an
Administrator.
2 Insert the ORiNOCO Gold wireless adapter in an available Type II PC
card slot on the target machine.
3 Windows 2000 presents a Wizard to help you install a new driver for the
ORiNOCO Gold adapter. Click Next.
NOTE: If Windows 2000’s plug-and-play feature automatically installs a
driver for the adapter instead of starting the Found New Hardware
Wizard, turn to Updating Existing Drivers on page 20 to update the
existing driver.
4
In the Install Hardware Device Drivers window, select the Search for a
suitable driver for my device option and click Next.