Installation guide

Wireless Guide 15
Installing the ORiNOCO Gold Adapter / Driver
NOTE: The location for Sniffer Portable drivers is C:\Program
Files\NAI\SnifferNT\Driver\en\AgereOrinoco\WinNT.
f
The Select OEM Option dialog box appears with the ORiNOCO
PC Card entry highlighted. Click OK.
The Add/Edit Configuration Profile dialog box appears (Figure
3-1).
Figure 3-1. The Add/Edit Configuration Profile Dialog Box
g Make sure the Default profile is selected, leave the adjacent
drop-down field set to its default value of Access Point (as in
Figure 3-1), and click Edit Profile.
NOTE: The OK button in the Add/Edit Configuration Profile dialog box
is not available until you click Edit Profile.
h
In the Edit Configuration dialog box, click the Adapter tab and set
the I/O Base Address and Interrupt options to the same values
you recorded for the ORiNOCO Gold adapter in Step 5 on page
13.
NOTE: Occasionally, Windows NT may have some difficulty installing
the wireless adapter’s driver even after allocating free resources. If this
happens, try changing some of the resource settings for the card (I/O
Base Address or Interrupt) to other free resources.